1-800-688-9759        770-939-9637

  A Fountain Post Mix Company

Home Directions Employment Contact Form Place Order Credit App. Contact Us

Beer Products

Beverage Control has been installing and servicing draft beer systems for well over 40 years.  We have several licensed refrigeration technicians who have worked on hundreds of the various kinds of draft systems.  Each technician is equipped with a 2-way phone and beeper, and we are always on call “24/7” for emergency service.

We sell, service and install the following types of draft dispensing systems:  

 

DIRECT DRAW UNIT  

A Direct Draw Unit is a self contained unit which can hold up to 4 ½ kegs, depending upon its size.  The standard with faucet is mounted right on top of the unit. These units are usually located at the bar and take up a lot of space.

 

GLYCOL SYSTEM  

A Glycol System uses a refrigeration unit to cool a liquid bath, and uses a pump to re-circulate this liquid along inside an insulated wrap with the beer lines.  This type of system is excellent for long line runs with multiple beers.  

 

AIR-CHUTE SYSTEM (tube in tube/side by side tube)    

n Air-Chute System will have a walk-in located near the bar.  The kegs are stored in the walk-in, and an insulated air chute with a blower attached will run to the beer station.  The system will have a second air-chute for the return air.  Total line run for this system should not exceed 20’ with bends to a minimum.  The walk-in should be used for beer only.
 

 

DRY TYPE REFRIGERATION  

This eliminates the need for a large cooling tank, and pumps usually require a smaller refrigeration unit for the same lie run (due to the fact that you don't have the extra heat generated by the tank and pump).  This type of system requires a qualified, licensed technician.